5
Computer Telephony Adapter 100/200 Installation Guide
P0888199 Issue 01
Canadian & US Safety Installation Instructions
Please Read Carefully
WARNING
: To avoid electrical shock hazard to personnel or equipment damage observe the
following precautions when installing telephone equipment:
1.
Never install telephone wiring during a lightning storm.
2.
Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.
3.
Never touch uninsulated telephone wires or terminals unless the telephone line has been
disconnected at the network interface.
4.
Use caution when installing or modifying telephone lines.
The exclamation point within an equilateral triangle is intended to alert the user to the presence
of important operating and maintenance (servicing) instructions in the literature accompanying
the product.
This symbol (if applicable) on the product is used to identify the following important information:
For equipment with internal mains supplies:
• Mains nominal AC voltage 110-120 V~ ; 50/60 Hz
• Mains nominal AC voltage 220-240 V~ ; 50/60 Hz
For equipment with external mains adapters:
CAUTION
: Intended for use in a protected environment. Use only a Nortel supplied or recommended
mains power adapter marked as indicated below:
The
marking on the product indicates compliance with the EU Low Voltage Directive (LVD) and the
Electromagnetic Compatibility Directive (EMCD).
Mains Supply
(Input Voltage)
Output
Voltage
Rated Current
Approval Markings
Polarity Marking
240 Vac
9 Vdc
0.6 A maximum
CLASS II POWER SUPPLY
230 Vac
9 Vdc
0.6 A maximum
CLASS II POWER SUPPLY
110 Vac
9 Vdc
0.6 A maximum
CLASS 2 POWER SUPPLY
- VE
+VE
- VE
+VE
NRTL/C
or
- VE
+VE
