MCS 5100 RTP Media Portal Basics
71
Copyright © Nortel Networks Limited 2006
before proceeding with the restore. For more information, refer to
Remote tape drive set up on page 69
From the terminal server
1
Prepare the system for restore. For instructions, refer to
.
2
Partition the hard drive. For instructions, refer to
3
Initiate the rollback. For instructions, refer to
Prepare system for restore
The following provides instruction to prepare the system for rollback.
From the terminal server
1
From the terminal server, prevent the console session from
timing out due to inactivity during the restore process.
TMOUT=0;export TMOUT;
<Enter>
2
Select the proper DDS4 tape, the most recent backup tape for
the server. Insert the tape into the tape drive of the tape host
server.
3
Reboot the Portal by pressing the reset button on the front of the
Host card.
4
From the terminal server session, press
F2
to enter the BIOS
Setup.
Use the escape sequence
<Shift+Esc+OQ>
instead of
F2
when
logged in from a terminal server.
Содержание NN10265-111
