Nortel N0060609, Руководство по установке

Страница: 42 / 84

42 Chapter 6 Telephone button icons
N0060609 0.3 N0060609 0.3
Internal and external page
FEATURE 63 and zone (0 to 6)
Make a page announcement through both your telephone speakers and an external
loudspeaker system. Zone 0 pages all zones.
Incoming page during active call:
The system can be set to either:
• Put an active call on hold, and broadcast the incoming page.
• Archive the page until you release the call.
This feature is set by your system administrator.
Note: Business Series Terminals: A call on mute when the page comes in, does not remain
muted when it is released from hold after the page.
Pause FEATURE 78
Program in an external autodial sequence to insert a 1.5-second delay.
For pulse dialing: * also inserts a 1.5-second delay.
Note: This feature is not supported on ISDN trunks.
Priority call FEATURE 69
Interrupt a person who is on a call.
A person on another call can press
FEATURE 85 (Do Not Disturb) to block priority calls.
Privacy FEATURE 83
Change the privacy setting for an external line. If a line normally has privacy, this permits
another telephone that shares the line to join your call by selecting the line while you are
using it. If a line normally has privacy disabled, this prevents another telephone that shares
the line from joining your call by selecting the line while you are using it. The privacy setting is
re-established once you end your call or when you enter the Privacy feature code again.
Ring again FEATURE 2 Cancel: FEATURE #2
Monitor a busy or unanswered telephone, or a busy line pool within your system. Ring Again
signals you to call back when the telephone or line pool becomes available.
Ring type FEATURE *6
Select a distinctive ring to help differentiate between your telephone and others nearby.
1. Press
FEATURE *6 .
2. Enter the ring type number (1 to 4).
3. Press
HOLD .
Ring volume FEATURE *80
Make your telephone ring so that you can adjust the volume. You also can adjust the volume
any time your telephone rings.
Run/stop FEATURE *9
Store more than one autodial number or external carrier feature code on one memory button
by inserting a break point between numbers or codes. The first press of the button dials the
first number or code; the next press dials the next number or code. You can program up to
four numbers or codes separated by break points.
Saved number
redial FEATURE 67
Save a number to redial later. Enter the code while you are on a call that you have dialed to
save the number. Enter the code when you are not on a call to redial the saved number.
Table 4 Telephone features (Sheet 5 of 7)
Feature Description