Nortel Modular ICS 6.0, Руководство пользователя

Страница: 69 / 294

P0992640 03 Modular ICS 6.0 System Coordinator Guide
Making calls
There are many ways to make a call, depending on the
programming and the type of call, as follows:
• Pick up the receiver and dial. The Norstar system supports
three methods of dialing. See
Changing how you dial your
calls
on page 73.
• Pick up the receiver, press a line button, and dial (if the call
is not on your prime line).
• Press the button labeled Handsfree/mute and dial to talk
without using the receiver. See
Using Handsfree/Mute on
page 61.
• Press the button labeled Handsfree/mute, then press a line
button, and dial to talk without the receiver if the call is not
on your prime line.
• Press a line button and dial to talk without the receiver if
Automatic Handsfree is assigned to your telephone.
• Use one of the features that make dialing easier. See
Time
savers for making calls on page 79.
Displays
The telephone you have called has no
internal lines available. Press
LATER to use
the Ring Again or Message features or press
PRIORITY to make a priority call.
You are dialing using Pre-dial. To erase an
incorrect digit, press the left end of
Ã
or BKSP . When the number is
complete, select a line or lift the receiver.
This prompt remains on your display as long
as you are on a call you have dialed. To
transfer the call, press
TRANSFER .
221 busy
PRIORITY
LATER
9__
QUIT BKSP
95551234
TRANSFER