Nortel Modular ICS 6.0, Руководство пользователя

Страница: 225 / 294

Using System features / 225
P0992640 03 Modular ICS 6.0 System Coordinator Guide
Pause
²à¡
The Pause feature enters a 1.5-second delay in a dialing
sequence on an external line. This is often required for
signaling remote devices, such as answering machines, or
when reaching through to PBX features or host systems.
You can program more than one pause in an external autodial
or speed dial sequence.
The Pause symbol (
›
) uses one of the 24 spaces in a dialing
sequence.
For pulse dialing,
¥ inserts a 1.5-second pause into the
dialing sequence.
Long Tones
The Long Tones feature allows you to control the length of a
tone so that you can signal devices such as fax or answering
machines which require tones longer than the standard 120
milliseconds.
1. While on a call, press
²¡â¡.
2. Press the dialpad buttons to produce the appropriate tones.
Each tone sounds for as long as you hold down the button.
Long tones can be used on any call except a conference call.
You can use internal lines of the Norstar system to activate a
device connected to an analog terminal adapter (ATA) in
another area of your office, or external lines to access devices
outside the Norstar system.