Nortel Millennium multi-pay M1211, Инструкция по установке, эксплуатации и обслуживанию

Страница: 107 / 350

3-24 Installing terminal software
When you establish two-way conversation,
this message
appears
on the VFD:
6. To complete the test, replace the handset on-hook.
C hecking the line
1. Lift the handset off-hook and call the operator.
Ask the operator to verify the telephone number of the
terminal and that the telephone is designated as a Mil­
lennium terminal.
2. If the terminal can receive incoming calls, ask the oper­
ator to call you back.
3. If the line to the terminal supports the Automated Call­
ing Card Service, dial 0 plus the number and, in re­
sponse to the bong tone, enter the calling card number.
Make sure the call connects.
To make another call
press the ♦ button
Testing the quick access keys
If the terminal has quick access keys, lift the handset and
press one of the keys on the quick access keys bezel.
• The handset produces DTMF tones.
• The number being dialed appears on the VFD.
• After dialing is completed, the handset produces
the ringback signal
When you establish a two-way conversation,
this message
appears
on the VFD:
To make another call
press the ♦ button
NTP: 506-6501-203 Document issue: 00.01 Status: Standard Date: January 1997