Nortel Meridian 1 Series Скачать руководство пользователя страница 1

Страница: 1 / 66

Document Number: 553-2201-117
Document Release: Standard 10.00
Date: January 2002

Year Publish FCC TM

Information is subject to change without notice. Nortel Networks reserves the right to make changes in design
or components as progress in engineering and manufacturing may warrant. This equipment has been tested
and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC rules, and the
radio interference regulations of Industry Canada. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at their own expense.

SL-1 and Meridian 1 are trademarks of Nortel Networks

Содержание Meridian 1 Series



































































Результаты поиска

Содержание Meridian 1 Series

Отзывы:

Похожие инструкции для Meridian 1 Series

Бренды по названию

Популярные бренды

Nortel Meridian 1 Series, Описание

Результаты поиска

Содержание Meridian 1 Series

Отзывы:

Похожие инструкции для Meridian 1 Series

Бренды по названию

Популярные бренды