manualshive.com logo in svg

Nortel M2018, Справочное руководство

Поделиться
Скачать
Nortel M2018 Скачать руководство пользователя страница 58

Testing and maintenance   13

Meridian SL-100 M2000 Digital Telephone Reference Manual

•

Table DNROUTE must be datafilled to accommodate up to 160 
specific ASR DNs that may be added to the table.

•

To enable a user to relocate a telephone set back into the system, 
the system must create a temporary datafill allowing the user to 
receive dial tone and dial the ASR In code. To accomplish this, the 
system must have a directory number to use, as well as having a 
customer group set aside for ASR In use, as follows: 

— One DN must be set aside for ASR In use only. One DN must be 

set aside for each set that is relocated at the same time as other 
sets are  relocated. Up to 1023 DNs may be relocated at the 
same time. Therefore, up to 1023 DNs must be set aside for ASR 
use.

— A special customer group must be identified for ASR In use only.  

Enter this customer group in the system like any other customer 
group.  (This special ASR customer group is identified in table 
OFCVAR for the entry ASR_CUSTGRP.)  If customer group is 
not identified for ASR_CUSTGRP, then no sets may perform the 
ASR In or ASR Out process.

Note: It is recommended that this customer group be 
established such that the user may only dial the ASR In code. 
If the user is allowed to perform normal telephone functions 
with the temporary datafill, there is no incentive for the user to 
perform the ASR In process. If every user who performs the 
ASR Out process decides not to bring the set back into service 
by performing the ASR In process, the maximum number of 
sets allowed in the ASR Out state would occur very quickly.

— The customer group identified in ASR_CUSTGRP is used for the 

temporary datafill in table KSETLINE along with a SUBGRP of 0 
and an NCOS of 0.

•

The ASR feature is assigned on a customer-group basis. Each 
customer group is allowed to perform ASR must have an entry in 
table CUSTHEAD identifying the ASR feature translator.

For a successful relocation, the new location must be equipped, and it 
must be datafilled with the appropriate card type (NT8X47BA) in table 
LNINV.

ASR procedures

To perform the ASR Out process, follow the steps in Procedure 8. To 
perform the ASR In process, follow the steps in Procedure 9.

If the user forgets the personal identification code in Step 5 of 
Procedure 6, operating company personnel may use the QUERY 

Содержание M2018






































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды