Nortel Enterprise Edge M7310N, Руководство пользователя карты

Страница: 6 / 7

Page 4 Enterprise Edge M7310N User Card
Setting up the telephone
Connecting the cords ATTENTION Before attempting to carry
out any work on the telephone, ensure that
the line cord is unplugged from the wall
socket.
To remove any of the cords, squeeze the
release latch on the plug and gently pull
the plug from the socket.
Connect the handset cord to the jack
labelled with the telephone icon and route
the cord as shown.
If you are using a headset, route the cord
along the channel in the base and connect
the cord to the telephone jack that is
marked with the headset icon.
Route the line cord through the stand and
connect the cord to the telephone jack that
is marked with the jack icon.
Attach the stand using either pair of slots;
to raise the back of the telephone to its
highest position, use these slots.
Once the above work is complete, plug the
line cord back into its wall socket.
Press here to
remove the stand.
1
Press here firmly
until it clicks, to
attach the stand.
2