Chapter 1 Introduction 37
Reference for the Contivity VPN Switch Command Line Interface
Privileged Exec Mode
This command mode is entered from User Exec mode with the enable command.
The administrator can exit from this mode with the disable command, they will be
returned to User Exec mode.
This is a full display and configuration mode; it enables additional commands to
those in User Exec mode. Exec commands are typically one-time commands, for
example, show commands and clear commands.
Privileged Exec Mode prompt
CES#
Privileged Exec Mode commands
The following table summarizes the Privileged Exec Mode commands
Table 3 Privileged Exec Mode commands
Command
Description
clear arp-cache
Clear ARP cache
clear logging events
Clear event log
configure
Enter configuration mode
disable
Turn off privileged commands
help
Display message about using help
kill
Terminate a Telnet session
more
Display the contents of a named file
reload
Reboot switch immediately
reload at
Schedule a switch reboot
reload cancel
Cancel pending reboot
reload in
Schedule a switch reboot
reload no-sessions
Schedule switch reboot when no
more sessions
show arp
Show ARP cache contents
show health
Show overall system health
show logging config
Show configuration log contents
