Nortel Compact ICS Telephone Feature Card, Руководство пользователя, Страница: 6 / 12

≤°›
Cancel
≤£°›
Send calls arriving on an external line to another telephone outside your Norstar
system. (Some external lines may not support this feature. See your system
coordinator.) This feature is not available on the M7100 telephone.
≤‡⁄
Generate a Link signal
Ü
to access a PBX or other host exchange.
≤°‚°
Generate a tone for as long as you hold down a button. This is used to
communicate with devices like fax or answering machines. Long tones are in
effect only for your current call.
≤⁄
Cancel
≤£⁄
Send a message to a telephone display.
To view and reply to your messages
1. Press
≤flfi
.
2. Press
•
and
£
to view your message list.
3. Press
‚
to call the person who left you the message.
To erase a message
1. Press
≥
while viewing a message.
≤•°⁄
Change the position of your line or hunt group buttons.
1. Press
≤•°⁄
.
2. Press the line button that you want to move.
3. Press the button to which you want to move the line.
4. Press
®
. The two buttons are exchanged.
5. Switch the button caps.
Line buttons cannot be exchanged with intercom, Answer or Handsfree/Mute
buttons.
≤°⁄·
Cancel
≤£°⁄·
Block the outgoing name and/or number on a per-call basis.
1. Press
≤°⁄·
.
≤fl‚
and code (1 to 3) and zone (1,2,3, or None)
Make a page announcement through either the internal (code 1) or external (code
2) speakers, or both (code 3).
Page announcements are programmed to time-out after a pre-selected amount of
time which is set by your installer.
Internal page
≤fl⁄
and zone (1,2,3, or None)
Make a page announcement to all, or to a specific group of Norstar telephones,
through the telephone speakers.
External page
≤fl¤
Make a page announcement through an external loudspeaker.
Line
Redirection
Link
Long Tones
Messages
Moving line
buttons
Name and
number
blocking
Page