Nortel BayStack 380, Инструкция по использованию, Страница: 101 / 218

Chapter 3 Using the console interface 101
Using the BayStack 380 10/100/1000 Switch
In-Band Subnet
Mask The subnet address mask associated with the in-band IP address shown on the screen
(see In-Band Switch IP address field). Network routers use the subnet mask to
determine the network or subnet address portion of a host’s IP address. The bits in the
IP address that contain the network address (including the subnet) are set to 1 in the
address mask, and the bits that contain the host identifier are set to 0.
Default Value 0.0.0.0 (no subnet mask assigned)
Range Four-octet dotted-decimal notation, where each octet is represented
as a decimal value, between 0 and 255, separated by a decimal
point
Default Gateway The IP address of the default gateway.
Default Value 0.0.0.0 (no IP address assigned)
Range Four-octet dotted-decimal notation, where each octet is represented
as a decimal value, between 0 and 255, separated by a decimal
point
IP Address to
Ping The IP address of the network device you want to ping.
Default Value 0.0.0.0 (no IP address assigned)
Range Four-octet dotted-decimal notation, where each octet is represented
as a decimal value, between 0 and 255, separated by a decimal
point
Start Ping Pings the selected network device when you choose Yes.
Default Value No
Range No, Yes
Table 9 IP Configuration/Setup screen fields (continued)
Field Description