1
302566-A Rev. 00
Annex Communications Server R7.1B and
Annex Host Tools R14.2 Release Notes
These release notes apply to the following:
❑
The Remote Annex Operational Code Version R7.1
❑
The Annex Host Tools Version R14.2.24
❑
Annex Manager R1.1
Included in these Release Notes are the following topics:
❑
New Features
❑
Special Considerations
❑
Supported Platforms
❑
Known Problems/Limitations
❑
Problems Resolved with this Release
New Features
printer_crlf
Epson printers monitor pin 14 of the parallel port to decide how to
handle CR. If pin 14 is high, the printer performs a CR. If pin 14 is
low, the printer performs a CR/LF. The default value is Y and enables
the converting of <CR> to <CR><LF>. The value of N disables the
parameter so the printer does not add a <LF>.
Telnet Connectivity to Parallel Ports
Parallel ports now appear on the network as Annex TCP ports 5901-
5999 and 7901-7999. This means that rtelnet can access the parallel
ports; aprint is no longer necessary to use the parallel ports.
