7
Annex Communications Server R10.0B and Annex Host Tools R14.2 Release Notes
302565-A Rev. 00
Rotary Enhancement
You can now specify an Annex rotary that is reachable through the
normal UNIX rlogin protocol. Specify either protocol=rlogin or the
alternate TCP port /513 to enable this feature. (The user name and
terminal type are discarded. Thus, if port_server_security is enabled,
you must enter your user name and password again.) For examples:
rlogin:protocol=rlogin 8-12@jdc
rlogin:8-12@jdc+132.245.33.229/513
rlogin:protocol=rlogin 8-12@jdc+132.245.33.229
rlogin:protocol=rlogin direct_camp_on=never
Year 2000 Compliance
The R10.0B release of software is Year 2000 Compliant for Micro
Annex XL and the Annex 3. R10.0B is Year 2000 compliant when run
self-boot mode or when run on a supported platform. The R14.2.24
host tools are Year 2000 compliant when run on a supported platform.
For more information, refer to SPR 11150 in the
Problems Resolved
with this Release
section.
Special Considerations
The R10.0 image names are as follows:
R10.0 Communication Servers:
oper.42.enet - Annex3
oper.52.enet - Micro AnnexXL
The Communications Server release does not support IPX and ARAP.
After an Annex boots, the Annex parameter disabled_modules is set
to ATALK and IPX. Annex configuration parameters related to these
protocols are in some cases displayed and can be modified but have
no effect on the operation of the Annex. For more information refer
to Known Problems section.
