Filters and QoS Configuration for ERS 5500
Technical Configuration Guide
v2.0
NN48500-559
___________________________________________________________________________________________________________________________
Nortel Confidential Information Copyright © 2008 Nortel Networks. All Rights Reserved.
External Distribution
38
11. Configuration Steps – Policy
Configuration
11.1 Role Combination
A role combination is formed by assigning one or more physical ports to the role and by
designating the interface class (Trusted, Untrusted, Un-restricted) for the role and associated
ports. By default, when using the WEB interface, all ports on the Ethernet Routing Switch 5500
are assigned to the default interface group named ‘allBayStacklfcs’ which has an interface class
of untrusted. A port on the Ethernet Routing Switch 5500 can only belong to one role
combination.
When configuring a policy, an interface group will be assigned to the policy.
To add a new role combination, complete the following steps:
a) Add a new Interface Group:
•
ERS5500-48T(config)#qos if-group name <name> class
<trusted|unrestricted|untrusted>
b) Assign the physical ports to the Interface Group:
•
ERS5500-48T(config)#
qos if-assign port <port #> name <if-group name>
Example:
•
ERS5500-48T(config)#qos if-group name role_one class untrusted
•
ERS5500-48T(config)#
qos if-assign port 1/5 name role_one
c) View
Role
Combination:
To view the Role Combination, enter the following command:
•
ERS5500-48T#show qos if-assign
Unit Port IfIndex Role Combination Queue Set
____ ____ _______ ________________ _________
1 1 1 allBayStackIfcs 8
1 2 2 allBayStackIfcs 8
1 3 3 allBayStackIfcs 8
1 4 4 allBayStackIfcs 8
1 5 5 role_one 8
•
ERS5500-48T#show qos if-group
Role Interface Capabilities Storage
Combination Class Type
________________________________ ____________ ___________________ ___________
allBayStackIfcs Untrusted Input 802, Input IP ReadOnly
role_one Untrusted Input 802, Input IP NonVolatile
