May 2004
24
FCC Statements for WLAN Access Ports (2230/2231)
FCC Statements for WLAN Access Ports (2230/2231)
FCC Statements for WL AN Access Ports (22 30/22 31)
This section includes the following FCC statements for the WLAN Access Port (2230/2231):
•
Class A Statement
•
RF Radiation Hazard Warning
•
Non-Modification Statement
•
Deployment Statement
Class A Statement
Class A Statement
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his
own expense.
RF Radiation Hazard Warning
RF Radiation Hazard Warning
To ensure compliance with FCC RF exposure requirements, this device must be installed in a location such that the antenna of the
device will be greater than 20 cm (8 in.) from all persons. Using higher gain antennas and types of antennas not covered under the
FCC certification of this product is not allowed.
Installers of the radio and end users of the Nortel Networks 2200 Series must adhere to the installation instructions provided in this
manual.
Non-Modification Statement
Non-Modification St atement
Use only the supplied internal antenna, or external antennas supplied by the manufacturer. Unauthorized antennas, modifications,
or attachments could damage the badge and could violate FCC regulations and void the user’s authority to operate the equipment.
Deployment Statement
Deployment St at ement
This product is certified for indoor deployment only. Do not install or use this product outdoors.