
Getting Started with the Contivity Extranet Switch 1500 Series
3-6
The following notes apply to the Single V.35 WAN Interface:
•
You will need a DSU/CSU (digital service unit/channel service unit)
between the WAN connection and the Switch.
•
At each end, Cable shield and connector shell must connect respectively
to pin A of 34-pin connector and pin 1 of the standard 28-pin connector.
•
The term “no conn” means the wire is not connected to a pin in the 34-pin
connector.
•
Wires 12B, 13A, and 14B connect to pin B in the 34-pin connector.
•
Unused pins in the 34-pin connector need not be present.
•
Do not connect Shield to Signal Ground as these are separate signals.
•
The pair suffix A or B refers to an individual wire within a twisted pair.
26
M0<-SIGNAL GROUND
B
27
M1<-SIGNAL GROUND
B
28
M2
no conn
Содержание 1500 Series
