Page
11
of
26
Copyright E-MetroTel ©2016
2828 W. Parker Rd. Unit B201, Plano, TX. USA. 75075
www.emetrotel.com
Feature
Steps
Call Park
1.
Press the
Feature
soft key followed by the feature code
74
.
2.
The system will say and display the PARKING LOT number.
4.
To retrieve the parked call, dial the PARKING LOT number from any phone.
Call Park Retrieval
1.
An alternative method to retrieve a parked call is to dial
*86
.
2.
The oldest parked call is retrieved regardless of who parked the call.
Display Name/Number for
active call
1.
The Name and Number of the calling party is automatically displayed for an
active call.
2.
For telephones with only a single line display, you can press the
Info
soft key
to toggle between the Name and Number.
Display Name/Number for
incoming call while on an
active call
1.
The Name and Number of another incoming call is automatically displayed
while you are active on an existing call.
2.
By default, the Name and Number will be displayed for 5 seconds.
Disconnect
1.
If using the handset, replace the handset into the cradle or press the
Release
key.
2.
If using Handsfree or Headset, press the
Release
key.
If nobody retrieves a parked call within the timeout period, the call is
automatically sent back to the extension that parked the call. The
duration of the timeout is configurable by the UCx Administrator under
Parking Lot.
The Call Display Timer is configurable by your UCx Administrator under
Nortel Settings.
