background image

5

Installation and Networking Guidelines for Optical Routing

 

to any third party the Software, or any information about the operation, design, performance, or implementation of the 
Software and user manuals that is confidential to Nortel Networks and its licensors; however, Licensee may grant 
permission to its consultants, subcontractors, and agents to use the Software at Licensee’s facility, provided they have 
agreed to use the Software only in accordance with the terms of this license.

3. Limited warranty. Nortel Networks warrants each item of Software, as delivered by Nortel Networks and properly 
installed and operated on Nortel Networks hardware or other equipment it is originally licensed for, to function 
substantially as described in its accompanying user manual during its warranty period, which begins on the date 
Software is first shipped to Licensee. If any item of Software fails to so function during its warranty period, as the sole 
remedy Nortel Networks will at its discretion provide a suitable fix, patch, or workaround for the problem that may be 
included in a future Software release. Nortel Networks further warrants to Licensee that the media on which the 
Software is provided will be free from defects in materials and workmanship under normal use for a period of 90 days 
from the date Software is first shipped to Licensee. Nortel Networks will replace defective media at no charge if it is 
returned to Nortel Networks during the warranty period along with proof of the date of shipment. This warranty does not 
apply if the media has been damaged as a result of accident, misuse, or abuse. The Licensee assumes all responsibility 
for selection of the Software to achieve Licensee’s intended results and for the installation, use, and results obtained 
from the Software. Nortel Networks does not warrant a) that the functions contained in the software will meet the 
Licensee’s requirements, b) that the Software will operate in the hardware or software combinations that the Licensee 
may select, c) that the operation of the Software will be uninterrupted or error free, or d) that all defects in the operation 
of the Software will be corrected. Nortel Networks is not obligated to remedy any Software defect that cannot be 
reproduced with the latest Software release. These warranties do not apply to the Software if it has been (i) altered, 
except by Nortel Networks or in accordance with its instructions; (ii) used in conjunction with another vendor’s product, 
resulting in the defect; or (iii) damaged by improper environment, abuse, misuse, accident, or negligence. THE 
FOREGOING WARRANTIES AND LIMITATIONS ARE EXCLUSIVE REMEDIES AND ARE IN LIEU OF ALL 
OTHER WARRANTIES EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF 
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Licensee is responsible for the security of its 
own data and information and for maintaining adequate procedures apart from the Software to reconstruct lost or altered 
files, data, or programs.

4. Limitation of liability. IN NO EVENT WILL NORTEL NETWORKS OR ITS LICENSORS BE LIABLE FOR 
ANY COST OF SUBSTITUTE PROCUREMENT; SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL 
DAMAGES; OR ANY DAMAGES RESULTING FROM INACCURATE OR LOST DATA OR LOSS OF USE OR 
PROFITS ARISING OUT OF OR IN CONNECTION WITH THE PERFORMANCE OF THE SOFTWARE, EVEN IF 
NORTEL NETWORKS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT 
SHALL THE LIABILITY OF NORTEL NETWORKS RELATING TO THE SOFTWARE OR THIS AGREEMENT 
EXCEED THE PRICE PAID TO NORTEL NETWORKS FOR THE SOFTWARE LICENSE.

5. Government licensees. This provision applies to all Software and documentation acquired directly or indirectly by or 
on behalf of the United States Government. The Software and documentation are commercial products, licensed on the 
open market at market prices, and were developed entirely at private expense and without the use of any U.S. 
Government funds. The license to the U.S. Government is granted only with restricted rights, and use, duplication, or 
disclosure by the U.S. Government is subject to the restrictions set forth in subparagraph (c)(1) of the Commercial 
Computer Software––Restricted Rights clause of FAR 52.227-19 and the limitations set out in this license for civilian 
agencies, and subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause of DFARS 
252.227-7013, for agencies of the Department of Defense or their successors, whichever is applicable.

6. Use of software in the European Community. This provision applies to all Software acquired for use within the 
European Community. If Licensee uses the Software within a country in the European Community, the Software 
Directive enacted by the Council of European Communities Directive dated 14 May, 1991, will apply to the examination 
of the Software to facilitate interoperability. Licensee agrees to notify Nortel Networks of any such intended 
examination of the Software and may procure support and assistance from Nortel Networks.

7. Term and termination. This license is effective until terminated; however, all of the restrictions with respect to 
Nortel Networks’ copyright in the Software and user manuals will cease being effective at the date of expiration of the 
Nortel Networks copyright; those restrictions relating to use and disclosure of Nortel Networks’ confidential information 
shall continue in effect. Licensee may terminate this license at any time. The license will automatically terminate if 

Содержание 10292FA







































































Отзывы: