76
Configure the Media Gateway Controller and DSP daughterboards in a PRI Gateway
•
Hostname, Call Server Hostname
After you have confirmed that the configuration changes have been
made successfully, you are prompted (Y/N) to reboot the MGC if the
configuration changes require a reboot to make the change.
Configure DSP daughterboards
Configure the Voice Gateway Channels (VGC) on DSP daughterboards in
one of two ways:
•
through Element Manager as described in
Channels in Element Manager” (page 76)
•
through LD 14 as described in
Procedure 15 “Configuring a DSP
daughterboard to support Voice Gateway Channels using LD 14” (page
80)
Configure Voice Gateway Channels in Element Manager
Procedure 14 “Configuring an MGC in Element Manager” (page
76)
describes how to configure an MGC on the CS 1000E Release 7.0
in Element Manager.
For more information about Element Manager, see Element Manager
System Reference - Administration.
Procedure 14
Configuring an MGC in Element Manager
Step
Action
1
In Element Manager, select System > IP Network > Media
Gateways.
2
Choose the Superloop Number and Shelf and click Add.
The window shown in
Figure 16 "Add IPMG" (page 77)
appears.
Nortel Communication Server 1000
Media Gateway 1000E PRI Gateway Installation and Commissioning
NN43041-311 04.01
4 June 2010
Copyright © 2007-2010 Nortel Networks. All Rights Reserved.
.
Содержание 1000E PRI
Страница 161: ......
