Nortel 1000E PRI, Руководство по установке и пусконаладке

Страница: 114 / 162

114 Configure an E1/T1 card
•
9600 baud
•
8 data bits
•
1 stop bit
•
no parity
3 Make sure that flow control is none.
--End--
CLI over a Web-based interface
You can access the CLI through the administrative console, which is useful
if a firewall does not allow Telnet access. See
Procedure 41 “Accessing
the command line interface over the Web” (page 114) .
Procedure 41
Accessing the command line interface over the Web
Step Action
1 To open a CLI screen, access the administration console and
click CLI on the toolbar at the top of the screen.
A separate window opens.
2 Enter commands and text as needed.
--End--
Access and configure an E1/T1 card through the Web
You can configure the E1/T1 card basic parameters and access basic
information through the Web. The information includes:
•
system settings
•
password change
•
users
•
upgrades
•
reports
•
backups
•
restores
See Procedure 42 “Accessing the basic parameters for the E1/T1 card
through the Web” (page 115) .
Nortel Communication Server 1000
Media Gateway 1000E PRI Gateway Installation and Commissioning
NN43041-311 04.01 4 June 2010
Copyright © 2007-2010 Nortel Networks. All Rights Reserved.
.