Nortek Vectrino, Руководство пользователя

Страница: 18 / 42

18
Chapter 5
Software
Installation
Follow these steps to install the software on a computer running Windows:
Insert the memory stick and run the Setup.exe file.
Follow the on-screen instructions. Accept the default settings.
If prompted to restart your computer, do so to finalize the installation.
Configurations
Using the enclosed cables, connect the Vectrino instrument to the power
and the USB port on your computer, and start the Vectrino software.
To configure the settings of your Vectrino, you can either
select
Data collection > Load From Instrument to read back the current
settings from the instrument
or
select
Data collection > Edit Configuration to load the settings from the
configuration file.
The
Configuration dialog box where you can adjust the settings will open.