9
Copyright © 2019 Nortek Security & Control LLC
Bypass Sensors
When you open a protected door or window, the
System Not Ready to Arm
message appears and reveals the zone in YELLOW on the
Sensors Not Ready
list.
Before you can arm the system, place the system into the
Ready to Arm
state by (1) walking to the sensor and closing it, or (2) bypassing the sensor.
To bypass the open sensors:
1
Review the
Sensors Not Ready
list
and close any desired sensors. If
you want to bypass the sensors in
the list, tap
Bypass All
.
2
Enter a valid user code. If the installer
enabled the
Quick Bypass
feature, you
are NOT prompted for your code and will
skip this step.
3
The system bypasses the sensor. You have
the option to tap yellow bubble (
) to view
the sensor(s) in the
Bypassed Sensors
list.
