Nortek Security & Control | 1950 Camino Vida Roble, Suite 150 | Carlsbad, CA 92008-6517 | USA | 800-421-1587 | www.nortekcontrol.com
Copyright © 2016 Nortek Security & Control LLC.
2
LED
Description/Condition
Power/BUS
Communication
(RED)
BUS communication between the panel and the
receiver.
Steady: BUS communication OK
Flash: In Program mode or
BUS communication trouble
Receiver
Communication
Communication between a wireless sensor and
the receiver.
Steady: BUS communication OK
Flash: BUS communication trouble
LED Indications
Programming Steps in the Panel
The following instructions outline the steps required to program the system to
enable wireless expansion using the wireless receiver. For full programming
instructions, refer to the
2GIG Vario System Installation & Programming Guide
.
1.
Define the receiver ID using DIP switches 1–3. The receiver ID is set to
1 by default.
2.
Allocate the receiver to the system (Programming Menu—Quick Keys:
⑦ ① ②
❺
).
3.
Allocate the relay outputs of the receiver as an output receiver (UO02)
to the system (Programming Menu—Quick Keys:
⑦ ① ②
❸
).
4.
Calibrate the receiver (Programming Menu—Quick Keys:
⑦ ② ❶
).
5.
Allocate the wireless device (Programming Menu—Quick Keys:
⑦ ② ②
).
6.
Perform a communication test between the receiver and the device
(Main Menu > Maintenance > Wireless Test).
7.
Set the receiver parameters (Zones—Quick Keys
② ①
, Keyfobs—
⑧ ②
) and the outputs parameters (Quick Key
③
).
NOTE:
Multiple receivers can be allocated to the panel.
2GIG
Nortek Security & Control LLC
1950 Camino Vida Roble, Suite 150
Carlsbad, CA 92008-6517 USA
For technical support in the USA and Canada:
Dial: 855-2GIG-TECH (855-244-4832)
Visit www.nortekcontrol.com or 2gig.com/dealers/
For technical support outside of the USA and Canada:
Contact your regional distributor
Visit www.nortekcontrol.com for a list of distributors in your region
FCC/IC Compliance:
This device complies with FCC Rules and Regulations as a Part 15 device, as
well as Industry Canada Rules and Regulations. Operation is subject to the
following two conditions:
1.
This device may not cause harmful interference, and
2.
This device must accept any interference received, including
interference that may cause undesired operation.
NOTE:
Changes or modifications to the device may void FCC
compliance.
* For more warranty and compliance information, visit www.nortekcontrol.com.
Limited Warranty
This Nortek Security & Control product is warranted against defects in material
and workmanship of two (2) years. This warranty extends only to wholesale
customers who buy direct from Nortek Security & Control LLC or through
Nortek Security & Control LLC's normal distribution channels. Nortek Security &
Control LLC does not warrant this product to consumers. Consumers should
inquire from their selling dealer as to the nature of the dealer's warranty, if any.
There are no obligations or liabilities on the part of Nortek Security & Control
LLC for consequential damages arising out of or in connection with use or
performance of this product or other indirect damages with respect to loss of
property, revenue, or profit, or cost of removal, installation, or reinstallation. All
implied warranties for functionality, are valid only until the warranty expires. This
Nortek Security & Control LLC Warranty all other warranties expressed or
implied.
2GIG® Vario System
2GIG Vario Wireless Receiver
10012335 A
