Nortech TD136 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 30

Nortech TD136 Скачать руководство пользователя страница 6

301UM0031_01

TD136 Enhanced Vehicle Detector User Manual

Page: 5 of 29

1.

INTRODUCTION

The  TD136  Enhanced  Vehicle  Detector  is  a  single  channel  microprocessor  based  detector  designed
specifically for traffic control applications. The TD136 Enhanced Vehicle Detector has been designed using the
most up-to-date technology in order to meet the requirements of a vast number of traffic applications in terms
of operating conditions and functional options available to the user.

The primary function of the detector is to detect vehicle presence by means of an inductance change caused
by  the  vehicle  passing  over  a  wire  loop  buried  under  the  road  surface.  The  detector  has  been  designed  for
ease of installation and convenience.

The detector has been designed for ease of installation and convenience. The various modes are selected by
changing the positions of the switch on the front of the unit.

The switches allow for different loop frequency settings, sensitivity settings and mode settings.

The TD136 Enhanced Vehicle  Detector  provides visual output (LED)  on the  front of the enclosure  and  relay
change-over contacts are taken on the 11 pin connector at the rear of the enclosure. The LED indicates the
power has been applied to the unit, that a vehicle is present over the loop and if there is a fault on the loop.

The Presence relay is fail-safe and will close on a vehicle detect or in the event of power failure. The TD136
Enhanced  Vehicle  Detector  is  also  provided  with  an  integral  fault  relay,  which  will  provide  an  output  in  the
event of a loop fault condition.

Related Documents:

TD136 Enhanced Vehicle Detector Data Sheet Document No. 305DS0002

Installation Leaflet Document No. 300LF0006

Diagnostic Unit DU100 User Manual Document No. 895UM0001

«
...
4
5
6
7
8
...
»

Содержание TD136































Отзывы:

Нет отзывов