Nortech MP1, Инструкция по эксплуатации

Страница: 2 / 10

125KHz Reader Wiring
Connect the reader cable to the reader port of the controller according to
the table below. For readers with a screw terminal block, refer to terminal
numbering diagram.
Terminal* Cable Function
1 Red +5VDC to +16VDC
2 Black Ground
3 Yellow Green LED input
4 White Wiegand Data 1 / Clock
5 Green Wiegand Data 0 / Data
8 Brown Beeper input
9 Orange Format Select (see below)
10 Blue Serial Data Output
Format Select: Use the ‘Format Select’ lead to set the required data output
format by connecting it to either Ground or +VDC as follows:
Reader Variant Connect to ground Connect to +VdC
EM1, HT1 10-Digit Clock & Data 26-Bit Wiegand
DP1 26-Bit Wiegand 44-Bit Wiegand
1 2 3 4 5
9
8
7
6
13
12
11
10
*Terminal
Numbering