895UM0001_02
DU100 User Manual
Page 11 of 19
4.6 Crosstalk ( Xtlk )
First level screen awaiting first data capture.
e.g.
The channel to be stored can be changed by pressing the Select button if the detector
is a multi-channel unit. The frequency of the channel indicated in the top right hand
corner will be stored when the Enter button is pressed. This value becomes the
reference until the mode is cleared and re-entered.
The following menu will be displayed after the Enter button is pressed.
e.g.
Upon each successful data capture by the DU100 a result of the crosstalk will be
automatically displayed. If the same channel of the the same detector is re-captured
the test will fail as the result will be based on the original value.
e.g.
CROSSTALK
1
Store . . .
CROSSTALK
1
Test :
CROSSTALK
3
Test: PASS
CROSSTALK
2
Test: FAIL
