Norsonic NOR150, Инструкция по эксплуатации

Страница: 85 / 216

69 Norsonic Nor150
Instruction Manual
69 Norsonic Nor150
Instruction Manual
It is important to know the different storage modes
and what features they offer.
The configuration of the storage mode is set in the
SETUP
> Measurement > Storage Mode.
Cf. Chapter Measurement Parameter Setup Menu ,
A short description of the storage mode is repeated
below;
Manual - Results are not stored. If you want to keep
the results save them manually by pressing the
MEM
button
Auto
- Every measurement is automatically stored
after it is finished. There are guidelines in the lover
frame on how new file names are supposed to be
generated.
Repeat - The results are saved and a new
measurement similar to the first one is immediately
started.
Synchronised
- Similar as Repeat, but the next
measurement is synchronised with the clock.
HINT! It is recommended to change the SD card
frequently to avoid data loss. Back up or transfer
data to another media. A memory card containing
a higher number of files will slow down the
performance of the storing process.
File name
The instrument offers a sophisticated file naming
system with a variety of options.
You may either enter the file name manually when
you store the file. This is only possible if you have
selected manual as storage mode. Default suggestion
is according to the settings in the
Memory menu.
If
Auto
,
Synchronised
or
Repeat
is chosen as storage
mode the default automatic file naming is chosen.
This stores a file with the date and time at the time the
measurement was stored. A more sophisticated naming
is enabled if you turn on “Filename Base” and “Start
Index”. The instrument will store the measurements
automatically and increase the file index by 1. You may
however choose which number to enumerate from (Start
Index). In any case the time and date will be added to
the filename.
Say you have a project consisting of several locations
and several measurements on each location. You may
then name your directory with the project name, say
“Project Highway” and make subfolders under this
directory, say “Route 66”
File Name Base.
Here you specify the start name /
default name of each location. Say “Sunny beach”
Start Index. The index is added to the File Name Base.
If you start on one, the first file will be named “Sunny
beach 1” plus the time and date.