Bluetooth Speaker
Instruction Manual (Read before proceeding)
Power:
Please charge your Bluetooth speaker fully before its first use.
Operates using an internal rechargeable Lithium battery.
To charge the battery:
Using a
Micro
USB cable (included), insert the USB power cable into the micro USB
port located on the back of the speaker. Connect the other end of the USB cord into a
powered USB source such as a computer, laptop or USB AC adapter (not included).
When your Bluetooth speaker is charging, the indicator light will turn red.
Once your Bluetooth speaker is fully charged, the red light will turn off.
Playing Music Via Bluetooth
Turn your Bluetooth speaker on by sliding the power switch located on the back of the
speaker to ‘ON’ position.
The indicator light will turn blue. This indicates that the speaker is in pairing mode and
is searching for your Bluetooth device.
Make sure the Bluetooth function on your device is turned on.
Search the speaker named ”XXXXXX”.
Once you have selected the speaker, your device will pair without a password. (If your
device prompts for a password, enter the password”0000”.
Once your speaker is paired, the indicator light will begin to flash blue slowly.
Start playing music on your device. Make sure that you keep your device within a 33
foot range of your Bluetooth speaker.
Adjust the volume of your device to a comfortable level.
Turn off the unit when not in use.
Cautions:
This is not a toy. Please keep away from children.
Please keep away from direct sunlight, excessive heat and water.
Low power may cause poor connection and/or may cause the Bluetooth function not
working
Dropping the speaker may damage it. Please put it in proper place.
