NORSKE NMAP004, Руководство пользователя

Страница: 3 / 20

- 3 -
SET UP
Assemble the table assembly (Fig. 1-A)
Fig.1 to the blade assembly (Fig. 1-B) using
4 small Phillips head screws (Fig. 1-C) to
secure the top of the table. Use two larger
pan head screws (Fig.1-D) to secure the
table brace.
Assemble the handle (Fig. 2-A) to the top of
the blade assembly. First, loosen the three
fixing screws (Fig. 2-B) using a hex key.
Insert the handle shaft into the cylindrical
hole; once properly aligned and inserted,
tighten the 3 fixing screws to secure handle
in place.
The laminate flooring cutter is shipped with
the blade assembly in the down and locked
position. This safety feature ensures that
the cutting edge of the blade is not exposed
during transport or storage. To unlock the
blade assembly, loosen the safety lock knob
(Fig. 3-A), depress the handle then slide the
lock knob to the right to disengage the lock
(Fig. 3-B).
WARNING! Secure handle in the down
position and re-engage the safety lock
before storing, carrying or transporting
your laminate flooring cutter.
ASSEMBLY
SETTING UP FOR OPERATION
FIGURE 1
FIGURE 2
FIGURE 3
A
B
C
D
A
B
A
B
WARNING
VERY SHARP BLADE