NORSELIGHT XENON R50 Series, Руководство пользователя

Страница: 15 / 52

15
N3-80 / N3-150
These high quality rectifier power supplies have been expressly designed to ensure the correct operation and long
life of short arc Xenon lamps. These units, developed to meet the recommendations of Xenon lamp manufacturers,
are fitted with special IREM transformers with adjustable magnetic shunt for continuous output regulation over the
entire operating range.
The new and peculiar design guarantees a low acoustical noise, i.e. less than 55dB(A).
The special design, including an auxiliary filter unit, ensures a low ripple with a negligible
starting energy. Weight N3 – 80 101 kg and N3 – 150 154 kg. Further instructions in Installation guide for Rectifier.
Component layout
1) Adjustment hand-wheel
2) Magnetic shunt (MS)
3) Transformers (T1 to T3)
4) Circuit breaker (QF) *
5) Auxiliary contact (S2) *
6) Output filter capacitors (C7 - C8)
7) Auxiliary filter (AF) (L) (on
request for N3-
50E, N3-80E, N3-100E models)
8) Protection capacitors (C1 to C6)
9) Ignition relay (A1)
10) Silicon diodes (D1 to D6)
11) Output terminals (+ , -)
12) Ground terminal (PE)
13) Input terminals (U V W)
14) Alarm ON/OFF terminal (X1) *
15) Fuse holder for main switch coil
16) Auxiliary transformer
(400V/415V
versions only)
17) Contactor for remote control
18) Auxiliary connector (for manual
switch on breaker
connection and fan powering (N3-
150E and N3-180E models))
19) ON/OFF switch with lock
20) Fan (N3-150E and N3-180E
models)