NORSELIGHT 600201238, Инструкция по установке и эксплуатации

Страница: 13 / 59

13
For 500-1000W
NP-0725 (for mounting in the motor-house)
This single-phase recti fi er has been designed to ensure correct operation and long life to short
arc Xenon lamps up to 1000W. It is characterized by galvanic insulation, a soft inrush current,
alow residual ripple value and a stable output current. Weight 3,35kg.
Further instructions in Installation guide for Recti
fi er see page 28.
A:180 mm
B:254 mm
H:82,5 mm
Note (1) The switch SW1 must remain in OFF position when the remote ON/OFF signal is
used.
Note: After an automatic safety shutdown of the power supply due to overheating,
the input power of the search light (L,N) has to be interrupted and connected
again for a reset of the power supply.
(Keep the unit with the fan running for a few minutes and disconnect the
mains input for >5 seconds).
If Power Supply is integrated in motor house (Art.No. 600201339):
1. Ta 50°C max running time until the searchlight will switch o ff is 2 hours.
2. Ta 45°C max running time until the searchlight will switch o ff is 6 hours.
3. Ta 35°C and less the searchlight is continuously running.
Setting 500W
Note (2) Put the switch in the ON position to select the lamp power. The rest of switches
must remain in the OFF position.
Setting 1000W
Setting 3000W