ATOM Ku GaN 20-40-80W BUC &
SSPA
052910
12
052910_rA - Operator Manual for ATOM Ku
GaN Series 20-40-80W
Section 2.3
J2
–
M
ONITOR AND
C
ONTROL
I
NTERFACE
The M&C interface is used to control the unit with a host computer. All on-board sensors are accessed
through this interface. Use of this connection is optional. Each ATOM is supplied with a mating
connector for the M&C interface.
M
ONITOR AND
C
ONTROL
I
NTERFACE
P
INOUT
The M&C interface is a ten-pin miniature circular connector. This connector is a MIL-C-26482 Series 1
receptacle, shell size 12, 10 pin (Amphenol® part number 93-533723-10P). A mating connector is
Amphenol® part number PT06E-12-10S-476. A range of compatible part numbers for the mating
connector may be used to add options to the plug such as right-angle, stress relief clamp, metal
color/finish, etc. Please contact the connector manufacturer for more information and/or refer to
Amphenol® catalog 12-070.
Figure 2-3: J2 M&C Connector Pin Arrangement
Table 2-1
summarizes the various pinout for the 20-40-80W ATOM Ku GaN.
Table 2-1: J2 Pinouts for ATOM Configurations
Connector
Pin
Standard
Configuration
Connector
Pin
Standard
Configuration
A
RS-485 Rx-
F
RS-232 Rx
B
RS-485 Rx+
G
GND
C
RS-485 Tx+
H
Open
D
Mute
J
RS-485 Tx-
E
RS-232 Tx
K
Open
Ground Pin(s): Pin G
Ground/shield for Ethernet, RS-485, RS-232 & Mute signals. This is internally connected to the case
ground. Do not exceed 100mA.