Everything you need to know
to operate your Sauce Master
TM
!
See page 3 for assembly.
See pages 4-5 for basic recipes and hints.
See pages 6-10 for delicious recipes!
See page 11 for accessories.
See pages 12-15 to order
additional or replacement parts.
2
To order additional or replacement parts for your Sauce Master
TM
, see chart on
page 12 for part # and part cost. Visit us online to order parts at
www.norpro.com/consumer
Sorry, no part orders accepted by phone.
Prices subject to change without notice. All prices in U.S. Funds
Parts Now Available Online!
QUICK & EASY! CLICK & BUY!
Assembly Instructions
1. Clamp the body firmly to your countertop
or table.
2. Assemble the crankshaft, spring, and
cup (Fig. A), making sure spring fits into
open end of the cup.
3. Place the thin flat rubber gasket in the
inside collar of the screen assembly.
(Fig. B)
4. Insert the square end of the crankshaft
assembly into the square hole inside the
spiral assembly.
5. Now fit the screen, spiral, and shaft
assembly into the body, inserting the
threaded end of the shaft through the
bushing in the body. (Fig. C)
6. Place the screen screws into the slotted
lugs on the body and begin to tighten the
wing nuts. Fit the guard around screen
assembly, slip the slot on guard over
screen screws, completely tighten
wingnuts until the screen assembly is
attached securely to the body. (Fig. D)
7. Attach the handle onto the threaded shaft
protruding from the back of the body and
tighten the handle securely to the shaft
by using the wing nut.
8. Insert the hopper into the top opening
of the body until snug.
9. View looking through hopper opening
when assembled correctly. (Fig. E)
Before assembling your Sauce Master
TM
for the first time, wash and dry all
components thoroughly. Coat the crankshaft and bushing of the body with
a little vegetable oil.
3
A
B
C
D
E
