Norma REVO CDP, Руководство пользователя

Страница: 14 / 38

REVO CDP / DS-1 / User manual 2 1 • Controls and connections
G A C
B L K J
F D E
I H
1.2 Controls and rear connections
A • Mains Switch, Power ON / OFF
B • Power connector
AC power inlet. Housing for mains cable connection
according to IEC / CEE 22 (VDE C13 connector). Check that
the mains voltage corresponds to that indicated on the
label on the rear panel.
C • Fuse
AC mains fuse. Verify that the voltage, the type and value
coincides with that indicated on the rear panel. Operation
reserved for qualified personnel in the service centers.
Attention:
For any reason the user must replace the fuse, it is
a operation reserved for qualified personnel in the
service centers.
D/E • OUT Unbal.
RCA connection sockets.
Output sockets for UNBALANCED signal right / left.
F/G • OUT Bal.
Balanced XLR sockets connection.
Output socket for BALANCED signal right / left.
REVO DS-1 options only features
H • USB B type Input
Usb 2.0 input.
I • SPDIF RCA input
RCA socket for SPDIF connection (75 ohms).
J • AES-EBU XLR input
XLR socket for SPDIF (AES/EBU) connection (110 ohms).
K • SPDIF Toslink Optical input
Toslink optical receiver for SPDIF connection.
L • SPDIF RCA input (optional CD output)
RCA socket for SPDIF connection (75 ohms), also
configurable as SPDIF output.
Fig. 2 Rear panel