MILK COOLERS
Installation, Operation, and
Maintenance Instructions
INSPECTION
When the equipment is received, all items should be carefully checked against the bill of lading to
insure all crates and cartons have been received. All units should be inspected for concealed
damage by uncrating the units immediately. If any damage is found, it should be reported to the
carrier at once, and a claim should be filed with the carrier. This equipment has been inspected and
tested in the Nor-Lake Manufacturing Facility and has been crated in accordance with
transportation rules and guidelines. Manufacturer is not responsible for freight loss or damage.
INSTALLATION
LOCATION
The self-contained refrigeration system located on the side of the cabinet requires free air access
for proper operation. There must be a minimum four-inch clearance between the sides of the
compressor compartment and building wall or other equipment.
Physical Specifications
Unit
Exterior Dimensions
Model
Width x Depth x Height*
AR081
47 1/4” 32 3/4” 33 1/4”
AR121
61 1/4” 32 3/4” 33 1/4”
AR161
75 1/4” 32 3/4” 33 1/4”
•
Note: Height dimension includes casters.
NOTE:
If one door is flipped open, the total door assembly may be slid from end to end for ease of
accessibility and loading. The total door assembly is also completely removable. However, care
must be taken when repositioning the door assembly on the cabinet to insure the correct door is on
the correct end of the cabinet, because the location of the locating pins on the interior of the doors
is different.
8/06 134682
