Noritz NC199-DVC, Руководство пользователя

Страница: 8 / 49

RC-9018M Operation Overview
Power Saving Mode
If you set "Powersave dsply" to "Yes" ( p.23),
unnecessary power consumption by the remote
controller is prevented. If approximately ten minutes
pass without using hot water or without pressing a
button, the display of the remote controller turns off.
This setting is adjustable p.23
[When using only one water heater:]
It is possible to set the remote controller to
alert the user when the
bathtub has reached
a preset fill volume
to prevent overfilling.
p.30
It is possible to lock
remote controller
operation.
p.22
It is possible to
automatically turn
the water heater
“ON” or “OFF”.
[
For recirculation systems (
)]
It is possible to circulate hot water only
during preferred times of day.
p.20 p.28
Automatically
turned "ON"
Automatically
turned "OFF"
Pi Pi !!
Basic operation
The initial setting is set to "Powersave dsply : No-1"
* If you use hot water or press a button, "Powersave dsply" is released.
If you press the PROG button only once, "Powersave dsply" is released and the automatic program
function will operate.
* If the setting temperature is set to 125°F/55°C or more, "Powersave dsply" will not function to prevent
accidental scalding.
* If "Recirc" is operating, "Powersave dsply" will not function.
The display turns off
(operation is "ON")