Noria ECO:100, Руководство по установке и эксплуатации

Страница: 6 / 8

PUMP CARE
CLEANING THE BASKET
1. Switch off the pump at the power supply
2. Close any valves on the pipe work
3. Unscrew the lid locking ring and remove the lid
4. Remove the pump basket
5. Empty debris
6. Refit the basket
7. Refit the lid and tighten lid locking ring
8. Open the valves on the pipe work
9. Switch on at the power supply
LEAKS
If the ground around the pump is wet or damp it indicates there is a leak. Trace the leak to the
source and repair the problem.
1. Check to make sure all the barrel unions are tight and O-rings are fitted
2. If the pump lid leaks when the system is turned off ensure the O-ring is lubricated and
fitted correctly
3. If no visible leaks are seen but water is still visible around the base of the pump, it
indicates the mechanical seal has failed. Switch off the pump and contact your pool
professional as soon as possible. A leaking mechanical seal will cause motor damage.