UKLEETC002023293
07
VP50 IO-Link
02/21
Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document. (2019 - 9261a) © 2019 Norgren GmbH
3.0 Features
Pin
Colour (typ.)
Connection
1
Brown
Power input (24 VDC ±25%)
2
n/a
-
3
Blue
Power ground (-V)
4
Black
Signal (C/Q)
5
n/a
-
• Closed-loop air piloted proportional control valve
• IO-Link communications
• Fast Response time
• Low Power consumption
• Output Pressure Feedback
• High visibility LED status light
• Manifold mountable
• RoHS compliant
• CE marked
The unit must be connected by a qualified individual. The
national and international regulations for the installation
of electrical equipment must be adhered to.
‣
Ensure power is isolated.
‣
Connect the unit as follows:
3.1 General Description
3.2 Electrical
Connections
The VP50 IO-Link is a digital proportional control valve using
the IO-Link communications protocol to both control the valve
output pressure but also provide feedback to the user system.
The pneumatic section is a diaphragm actuated glandless spool valve.
Pilot pressure applied to the diaphragm moves the spool and regulates
the output pressure of the unit. The pilot pressure is developed by a voice-
coil pilot (I/P) which is controlled electronically by the onboard PCB.
The IO-Link communication protocol allows the user to not
only control the output of the device but also adjust operating
parameters and monitor various performance feedbacks,
such as current output pressure and cycle count.
Chassis Earth connection should always be connected to
deliver optimum continuous EMC performance.
Subject to change without notice
UKLEETC002023293
7
VP50 IO-Link
3.0 Features
Closed-loop air piloted proportional control valve
IO-Link communications
Fast Response time
Low Power consumption
Output Pressure Feedback
High visibility LED status light
Manifold mountable
RoHS compliant
CE marked
3.1 General Description
The VP50 IO-Link is a digital proportional control valve using the IO-Link communications protocol
to both control the valve output pressure but also provide feedback to the user system.
The pneumatic section is a diaphragm actuated glandless spool valve. Pilot pressure applied to the
diaphragm moves the spool and regulates the output pressure of the unit. The pilot pressure is
developed by a voice-coil pilot (I/P) which is controlled electronically by the onboard PCB.
The IO-Link communication protocol allows the user to not only control the output of the device but
also adjust operating parameters and monitor various performance feedbacks, such as current
output pressure and cycle count.
3.2 Electrical Connections
The unit must be connected by a qualified individual. The national and international regulations for the
installation of electrical equipment must be adhered to.
► Ensure power is isolated.
► Connect the unit as follows:
Chassis Earth connection should always be connected to deliver optimum continuous EMC
performance.
Pin Colour
(typ.)
Connection
1
Brown Power input (24 VDC ±25%)
2
n/a
-
3
Blue
Power ground (-V)
4
Black
Signal (C/Q)
5
n/a
-