Nordyne R4GD 024K045 Скачать руководство пользователя страница 1

Installation Instructions

Single Package Gas Heating/Electric Cooling

Do not store or use gasoline
or other flammable vapors
and liquids in the vicinity of
this or any other appliance.

DO NOT DESTROY.  PLEASE READ CAREFULLY AND KEEP IN A SAFE PLACE FOR FUTURE REFERENCE.

WARNING:

Improper installation, ad-
justment, alteration, ser-
vice, or maintenance can
cause injury or property
damage. Refer to this  man-
ual. For assistance or addi-
tional information consult a
qualified installer, service
agency, or  the gas suppli-
er.

These instructions are primarily intended to assist qualified individuals experienced in the proper installation of this
appliance. Some local codes require licensed installation/service personnel for this type of equipment. Read all
instructions carefully before starting the installation.

FOR YOUR SAFETY

WHAT TO DO IF YOU SMELL GAS

Do not try to light any
appliance.

Do not touch any electrical
switch; do not use any phone
in your building.

Immediately call your gas
supplier from a neighbor's
phone. Follow  the  gas
supplier's instructions.

If you cannot reach your gas
supplier, call the fire
department.

Extinguish any open flame.

High Efficiency

FOR YOUR  SAFETY

!

Содержание R4GD 024K045





























Отзывы: