5
INSTALLER INFORMATION
IMPORTANT SAFETY INFORMATION
Please read all instructions before servicing this equipment.
Pay attention to all safety warnings and any other special
notes highlighted in the manual. Safety markings are
used frequently throughout this manual to designate a
degree or level of seriousness and should not be ignored.
WARNING
indicates a potentially hazardous situation that
if not avoided, could result in personal injury or death.
CAUTION
indicates a potentially hazardous situation that
if not avoided, may result in minor or moderate injury or
property damage.
WARNING:
Shut off all electrical power to the unit
before performing any maintenance or
service on the system. Failure to comply
may result in personal injury or death.
WARNING:
Unless noted otherwise in these
instructions, only factory authorized parts
or accessory kits may be used with this
product. Improper installation, service,
adjustment, or maintenance may cause
explosion, fi
re, electrical shock or other
hazardous conditions which may result
in personal injury or property damage
WARNING:
P5RF units are fully charged with R-410A
refrigerant and ready for installation. When
a system is installed according to these
instructions, no refrigerant charging is
required. If repairs make it necessary for
evacuation and charging, it should only be
attempted by qualifi ed, trained personnel
thoroughly familiar with this equipment.
Some local codes require licensed
installation service personnel to service this
type of equipment. Under no circumstances
should the equipment owner attempt to
install and/or service this equipment. Failure
to comply with this warning could result in
equipment damage, personal injury, or death.
CAUTION:
This unit uses refrigerant R-410A. DO NOT
use any other refrigerant in this unit. Use
of another refrigerant will damage the unit.
WARNING:
The information listed below must be
followed during the installation, service,
and operation of this unit. Unqualifi ed
individuals should not attempt to interpret
these instructions or install this equipment.
Failure to follow safety recommendations
could result in possible damage to the
equipment, serious per
sonal injury or death.
• The installer must comply with all local codes and
regulations which govern the installation of this type
of equipment. Local codes and regulations take
precedence over any recommendations contained in
these instructions. Consult local building codes and
the National Electrical Code (ANSI CI) for special
installation requirements.
• All electrical wiring must be completed in accordance
with local, state and national codes and regulations
and with the National Electric Code (ANSI/NFPA 70)
or in Canada the Canadian Electric Code Part 1 CSA
C.22.1.
• This equipment contains liquid and gaseous refrigerant
under high pressure. DO NOT USE ANY PORTION OF
THE CHARGE FOR PURGING OR LEAK TESTING.
Installation or servicing should only be performed by
qualifi ed trained personnel thoroughly familiar with
this type equipment.
• This unit is designed for outdoor installations only and
should be located in a position as shown on page 6.
• Follow all precautions in the literature, on tags, and
on labels provided with the equipment. Read and
thoroughly understand the instructions provided with
the equipment prior to performing the installation and
operational checkout of the equipment.
