Nordyne IQ Drive, Руководство пользователя

Страница: 12 / 20

12
Dehumidifi cation
Dehumidifi cation is the process of reducing the level of humidity in the air. The system can only provide
dehumidifi cation when an air conditioner or heat pump is connected to the heating/cooling system. The
default setting is ON.
Smart Recovery
The Smart Recovery option (disabled by default) can
enhance comfort by modifying heating and cooling
setpoints to ease the transition from one program
schedule to the next. During the time prior to a
program schedule change (which will call for higher
heating setpoint or lower cooling setpoint), Smart
Recovery gradually adjusts the setpoint in 1 degree
increments to anticipate this change. Thus room
temperature will be at or close to the setpoint for the
next time block when that time block begins. Actual
results depend on home system characteristics. This
function is not available when the thermostat is in
nonprogrammable mode. Smart Recovery does not
apply to iQ Zone systems with zone control enabled.
1. Select MENU on the Main Screen using the
or button.
2. Press the button.
3. Select SETTINGS using
the or button.
4. Press the button.
5. Select OPTIONS using
the or button.
6. Press the button.
7. Select the option beneath
SMART RECOVERY
using the
or button.
8. Press the button.
9. Change the SMART RECOVERY setting:

The button changes the setting to ON and the
button changes the setting to OFF.
10. Press the button to save the setting.
Auto Changeover Time
Auto Changeover Time sets the minimum time
off before the thermostat can change from heat
to cool or vice versa when in auto mode. This
prevents the system from jumping back and forth
between heating and cooling equipment. The time
can be set between 15 - 120 minutes (in 15 minute
increments) or DISABLE. Setting auto changeover
time to DISABLE removes AUTO from the operating
mode menu. To select an operating mode see
page 6.
1. Select MENU on the Main Screen using the
or button.
2. Press the button.
3. Select SETTINGS using the
or button.
4. Press the button.
5. Select OPTIONS using the
or button.
6. Press the button.
7. Select the option beneath AUTO CHANGEOVER
TIME using the or button.
8. Press the button.
9. C h a n g e t h e A u t o
Changeover Time:

The button adjusts the
time 15 minutes forward
and the button adjusts
the time 15 minutes
backward.
10. Press the button to save the setting.













     









  

  







1. Select MENU on the Main Screen using the
or button.
2. Press the button.
3. Select SETTINGS using the
or button.
4. Press the button.
5. Select OPTIONS using the
or button.
6. Press the button.
7. Select the option beneath DEHUMIDIFICATION
using the or button.
8. Press the button.
9. C h a n g e
t h e
DEHUMIDIFICATION
setting:

The button changes
the setting to ON and
the
button changes
the setting to OFF.
10. Press the button to
save the setting.






  

  







