Nordson PowderPilot HD, Руководство пользователя

Страница: 12 / 52

Powder Pilot ™ HD
P/No.7192721_02
Page | 12
Section 2
Description
Product Information
The Nordson PowderPilot ™ is an easy−to−use control system, with
software and hardware specifically designed for automated powder
coating systems.
The spray control system is based around a Siemens S7−315 PLC
unit providing plant control, and a Siemens PC−677 providing
Human-Machine-Interface.
The spray control system is based around a Siemens S7-300 Soft-
PLC unit providing plant control via a Siemens S1200 PLC, and a
Siemens PC-277D panel PC providing Human-Machine Interface
A touch sensitive screen is used for all interactions between the
operator and the machine. In addition the control panel is fitted with
an Emergency
Stop push−button, a Reset push−button and a klaxon
unit.
The 15” touch sensitive screen is used for all interactions between
the operator and the machine In addition, the control panel is fitted
with an Emergency Stop push-button, a Reset push-button and a
light stack with klaxon unit.
This manual describes in detail, the operation required to control the
plant via the operator interface.
This manual describes the operation required to control the plant via
the operator interface as well as operating the SpectrumHD GenII
feed centre for fast and easy colour change.
NOTE: The Nordson PowderPilot ™ is a bespoke control system and
is always designed according to customer requirements.
Technical support is available from your local Nordson
Representative.