Nordson NH-4, Руководство пользователя по изделию

Страница: 19 / 75

NH-4 Fluid Heaters
15
Part 1602369-03
E
2020 Nordson Corporation
Daily Maintenance
WARNING: Allow only qualified personnel to perform the following tasks.
Follow the safety instructions in this document and all other related
documentation.
WARNING: Use appropriate respiratory and skin protection when using
coating materials and solvents. Obtain and read the Material Data and
Safety Sheets from the manufacturer before use, and follow manufacturer’s
recommended handling and disposal procedures.
1. Remove paint with a solvent soaked cloth. Do not soak any component
in solvent. O-rings may be affected by some solvents.
2. Make sure fittings are tightened securely.
3. Tighten the tube fittings for the stainless heater inlet and outlet ports to
their original position as follows:
a. Make sure the tubing is resting firmly on the shoulder of fitting.
b. Tighten the nut by hand.
c. Using a wrench, tighten the nut to the original position. An increase
in resistance occurs when the original position has been reached.
d. Tighten the nut slightly.
4. Make sure the heater is grounded.
5. Leave a compatible solvent in the heater when it is not in use.