Issued 4/98
6
237505b
Daily Operations
To do this . . .
Press this key . . .
This happens . . .
It means . . .
Turn the power on.
The POWER switch turns on.
Power to the unit is on.
Turn the power off.
The POWER switch turns off.
Power to the unit is off.
Scan the temperatures
of each zone.
The MONITOR/SCAN light
turns on and stays on.
The system scans each
heated zone and displays
each zone’s temperature.
Monitor the temperature
of a zone.
The MONITOR/SCAN light
stays on.
The system displays the
temperature of only the
zone currently selected.
Place the system in
standby.
The STANDBY light turns on.
Heating zones hold at
your preset standby
temperatures.
Take the system out of
standby.
The STANDBY light turns off.
Heating zones return to
your operating setpoint
temperatures.
Turn the heaters on.
The HEATERS light turns on.
The tank, hoses, and
guns are heated.
Turn the heaters off.
The HEATERS light turns off.
No heat is applied to
system components.
Turn the 7-day clock on.
The CLOCK light turns on.
The system performs
functions controlled by
the clock.
Turn the 7-day clock off.
The CLOCK light turns off.
The system does not
perform functions
controlled by the clock.
Turn the pump on.
The PUMP light turns on.
The pump draws melted
material through the
system.
Turn the pump off.
The PUMP light turns off.
The pump stops drawing
melted material through
the system.
Determine whether a
fault was corrected.
All LED lights turn on while
the system begins a
five-second test. At the end
of the test, the FAULT light
turns off.
The fault was corrected.
All LED lights turn on while
the system begins a
five-second test. At the end
of the test, the FAULT light
stays on.
The fault was not
corrected.
Original copyright date 10/97. Nordson is a registered trademark of Nordson Corporation.
