Nordson Sealant Equipment PRO-METER V2K, Руководство пользователя по изделию, Страница: 137 / 195

Screen Descriptions
14-9
Part 7440274
2017 Nordson Corporation
Material Pressure History
See Figure 14-91
This screen allows the operator to monitor a 60 second pressure window.
Material pressure is represented as a yellow line across the graph. The
material pressure history can give insight into fluctuations and patterns
throughout the dispense cycle. It can aid in pressure tuning and
troubleshooting. The maximum and minimum pressure data boxes record
the highest and lowest pressures for respective sides of the meter.
Recorded pressures can be reset to 0 psi and re − recorded until they are
reset again. The status indicators along the bottom of the screen illuminate
throughout the dispense cycle at appropriate times. The green push buttons
at the bottom of the screen grant the operator manual control over dispense
and reload. A push button on the Pressure Setup Screen is utilized to reflect
pressure in PSI or BAR.
Directs operators to
Meter Status Screen
Directs operators to
Material Pressure Screen
Figure 14-91 Material Pressure History HMI Interface