manualshive.com logo in svg

Nordson EFD PICO Touch Series, Руководство по эксплуатации

Поделиться
Скачать
Nordson EFD PICO Touch Series Скачать руководство пользователя страница 70

PICO 

Toµch

 Series Controllers

70

www.nordsonefd.com   [email protected]

   +1-401-431-7000    Sales and service of Nordson EFD dispensing systems are available worldwide.

Appendix B, 

Toµch

 XP Controller (continued)

WAVE PARAMETERS screen on the Toµch XP controller (STROKE units set in microns)

Button

Description

CLOSE VOLTS

Sets the voltage to close the valve. The higher the voltage, the greater the sealing force 
applied.

STROKE

Sets the tappet displacement in microns.

NOTE: 

This parameter differs on the standard 

Toµch

 controller. Refer to “WAVE PARAMETERS 

Screen (Standard 

Toµch

 Controller)” on page 28.

OPEN

Sets how fast the valve opens. The range is valve-dependent, but typically 200–500 µs.

CLOSE

Sets how fast the valve closes. The range is valve-dependent, but typically 200–2,000 µs.

When pressed on this screen, the Wave Profile icon opens the WAVE PROFILE screen, on 
which you can select a different wave profile. Refer to “WAVE PROFILE Screen” on page 27 
for details.

Toµch

 XP WAVE PARAMETERS Screen

The WAVE PARAMETERS screen is used to adjust the parameters of a wave profile in order to fine-tune the 
resulting material deposit. The graph on the screen provides a visual representation of a wave profile.

NOTES:

•  On a 

Toµch

 XP controller, the STROKE value is set in microns.

•  This screen is accessed in two ways: (1) by pressing the Wave Profile icon (

) on the HOME screen or (2) by 

pressing the Wave Profile icon (

) on the WAVE PROFILE screen.

•  Wave profiles are enabled on the WAVE PROFILE screen. Refer to “WAVE PROFILE Screen” on page 27.

Содержание PICO Touch Series













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды