manualshive.com logo in svg

Nordson EFD PICO Touch Series, Руководство по эксплуатации

Поделиться
Скачать
Nordson EFD PICO Touch Series Скачать руководство пользователя страница 27

PICO 

Toµch

 Series Controllers

27

www.nordsonefd.com   [email protected]

   +1-401-431-7000    Sales and service of Nordson EFD dispensing systems are available worldwide.

WAVE PROFILE Screen

A wave profile, or waveform, is the rise and fall of the valve actuation signal. The WAVE PROFILE screen is used to 
select a wave profile. Two pre-programmed wave profiles (RAMP and SMOOTH) are included. RAMP is the default 
wave profile. Up to four additional custom wave profiles can be created by Nordson EFD. Contact your Nordson 
EFD technical support representative for assistance.

NOTES:

•  Press the RAMP or SMOOTH buttons for a description of these profiles (and also to enable the selected profile).

•  On the WAVE PROFILE screen, press the Wave Profile icon (

) to open the WAVE PARAMETERS screen, 

which is used to fine-tune the enabled wave profile. Refer to “WAVE PARAMETERS Screen (Standard 

Toµch

 

Controller)” on page 28 for details.

Button

Description

RAMP

Enables the Ramp wave profile. This is the default selection. Use this wave profile when 
dispensing thicker or shear-thinning fluids.

SMOOTH

Enables the Smooth wave profile. Use this wave profile for micro-bubble mitigation. The 
Smooth wave profile has softer edges to prevent agitation or cavitation of shear, sensitive 
fluids, such as UV-cure adhesives.

1, 2, 3, or 4

Up to four custom wave profiles configured by Nordson EFD can be added. Contact your 
Nordson EFD technical support representative for assistance.

Содержание PICO Touch Series













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды