manualshive.com logo in svg

Nordson EFD PICO Touch Series, Руководство по эксплуатации

Поделиться
Скачать
Nordson EFD PICO Touch Series Скачать руководство пользователя страница 39

PICO 

Toµch

 Series Controllers

39

www.nordsonefd.com   [email protected]

   +1-401-431-7000    Sales and service of Nordson EFD dispensing systems are available worldwide.

Setup and Programming Procedures (continued)

Viewing or Changing System Settings

Follow this procedure as needed to view or change the SYSTEM 
settings explained under “SYSTEM Screens” on page 32.

1.  Press the SETTINGS icon (

).

2.  Press the SYSTEM icon (

) and enter the SYSTEM password.

3.  Press MORE... to toggle between the SYSTEM1,2 and SYSTEM2,2 

screens.

4.  Refer to the SYSTEM section of the “SYSTEM Screens” on 

page 32 for detailed information the following SYSTEM screen 
selections:
•  PULSE OFFSET
•  MAX PULSER Time
•  SHOW VALVE External
•  MIN. CYCLE Time
•  PULSE OK Time
•  CELSIUS / FAHRENHEIT (how temperature units display)
•  SERVICE
•  Show STACK Temp.

NOTE: 

For PASSWORDS, refer to “Managing Password 

Protection” on page 40.

NOTE: 

For RESET, refer to “Restoring the System to the Factory 

Default Settings” on this page.

5.  Press HOME to save the setting and return to the HOME screen.

Restoring the System to the Factory 

Default Settings

Follow this procedure to restore all system settings to their factory-
default values.

1.  Press the SETTINGS icon (

).

2.  Press the SYSTEM icon (

).

3.  Press MORE... > RESET > and enter the RESET password.

4.  Press OK (check) to reset the system. The system prompts for 

verification.

ABOUT

CALENDAR 

CLOCK SET

OK (check)

LANGUAGE

WAVE 

PARAMETERS

Backspace

Cancel

HEATERS

LOCKOUTS

SETTINGS

LCD SETTINGS

 Decimal Point

HOME

PASSWORDS

SYSTEM

CYCLE

Decrement

Increment

PURGE

VALVE

Содержание PICO Touch Series













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды