Nordson EFD 7362738 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 24

Nordson EFD 7362738 Скачать руководство пользователя страница 4

Safety Enclosure for Automated Dispensing Systems

4

www.nordsonefd.com [email protected]

800-556-3484 Sales and service of Nordson EFD dispensing systems are available worldwide.

Introduction

This manual provides safety, installation, operation, service, and parts information for guarded safety
enclosures for all PROPlus, PRO, EV, E, and R Series automated dispensing systems. The safety
enclosure is shipped fully assembled in a large wooden crate, making installation and setup easy.

For installation in the European Union (EU) and areas with similar regulations, these CE-compliant
enclosures provide full compliance with EU Machinery Directive 2006/42/EC, essential for all production
requirements.

Nordson EFD safety enclosures easily integrate into existing production lines. Each enclosure features an
internal lockable electrical control box and integrated wireways that allow easy cable routing for faster,
safer setup. A safety light curtain at the front opening stops the dispensing cycle anytime an object
passes its sensing field.

External controls, including START, EMERGENCY STOP, and RUN/TEACH, allow operators to control
the dispensing system from outside of the enclosure. An ergonomic, adjustable monitor bracket and
keyboard tray make it easy to program vision-guided systems at any height.

CE-compliant safety enclosure with an installed automated
dispensing system (EV Series system and standard safety
enclosure shown)

«
...
2
3
4
5
6
...
»

Содержание 7362738

























Отзывы:

Нет отзывов